灯箱制作工艺
济南灯箱哪家好
13075398219
济南灯箱广告
灯箱制作厂家
山东广告传媒有限公司为您提供济南灯箱、济南灯箱制作、济南灯箱安装、济南灯箱广告等相关信息发布和相关资讯,敬请关注! 收藏本站联系我们
济南灯箱价格

全国服务热线

13075398219

当前位置: 首页 - 新闻中心 > 最新新闻 >

新闻中心

济南灯箱制作厂家分析流程是什么?

发布时间:2021-03-25 11:03:03 来源:http://www.jinandengxiang.com/

如今,到处都有各种各样的广告灯箱。为了不被忽视和遗忘,无论是在大城市还是小城镇中,他们都尽力向大众展示自己的商业灯箱和品牌标志。今天红晨将向您介绍济南灯箱制作的方法和流程。
Nowadays, there are all kinds of advertising light boxes everywhere. In order not to be ignored and forgotten, they try their best to show their commercial light box and brand logo to the public, whether in big cities or small towns. Today Hongchen will introduce to you the method and process of making Jinan light box.
1.制作框架:对于尺寸较小的灯箱,通常使用30mmX40mm,40mmX50mm的木材制作框架;如果灯箱的尺寸较大,则使用上述顶篷和其他悬臂式框架制作材料和方法。将框架材料拉紧并粘合在一起。如果使用钢框架,则可以使用焊接。
1. Making frame: for the light box with smaller size, the frame is usually made of 30mmx40mm and 40mmx50mm wood; if the size of the light box is larger, the materials and methods for making the ceiling and other cantilever frame are used. Tighten and bond the frame material together. If steel frames are used, welding can be used.
2。覆盖面板:灯箱的大部分面板是有机玻璃面板,它们柔软且易于加工,并且不怕风吹雨打。面板和框架可以用螺钉连接,在连接之前,应在有机玻璃板上钻一个1.5mm的小孔,以防止在拧紧时面板破裂。
2。 Cover panel: most of the panels of the light box are plexiglass panels, which are soft and easy to process, and are not afraid of wind and rain. The panel and frame can be connected by screws. Before connection, a 1.5mm hole should be drilled on the plexiglass plate to prevent the panel from cracking when tightening.
3。安装金属框架:根据灯箱外缘的尺寸,用型材切割机或小型钢锯切割铝合金或不锈钢角钢,以500-600mm的间隔钻出1.5mm的钉孔,并盖上金属角杆将灯箱边缘的角钉或钉入框架中,以完成灯箱的基本形状。将相关字体或图案粘贴到其上后,完成的灯箱就完成了。
3。 Installation of metal frame: according to the size of the outer edge of the light box, aluminum alloy or stainless steel angle steel shall be cut with profile cutter or small hacksaw, 1.5mm nail holes shall be drilled at 500-600mm intervals, and metal corner bars shall be covered to nail or nail the corner nails at the edge of the light box into the frame to complete the basic shape of the light box. After pasting the relevant font or pattern on it, the finished light box is finished.
4。灯箱安装:安装灯箱时,需要考虑其安装方法。有很多方法可以将灯箱连接到墙上。常见的方法是悬挂,悬臂和附件。
4。 Installation of light box: when installing the light box, the installation method should be considered. There are many ways to connect a light box to a wall. Common methods are suspension, cantilever and accessories.
以上就是小编为大家介绍关于济南灯箱制作的流程介绍,希望通过本文可以帮助到您,想要了解更多精彩内容请大家关注:http://www.jinandengxiang.com里面会呈现不同的知识。
The above is Xiaobian's introduction to the production process of Jinan light box. I hope this article can help you. If you want to know more wonderful content, please pay attention to: http://www.jinandengxiang.com There will be different kinds of knowledge.

相关推荐

首页首页 产品产品 电话电话 置顶置顶